Monday, March 25, 2013

Micromax Canvas 2 Engineering Mode (A110) & Improve audio/touch & Tv Output

Hey Guys,

Recently I also Purchased Micromax Canvas 2, so thought of going through in deep, the first thing i noticed in the mobile was that its response of touch is less as compared to its other sets, but that can be due to its big screen & the Second Problem was of less speaker volume.

Here i will Provide You Solution to both of these problems :
The Solution to your touchscreen smoothness is a simple one just upgrade your mobile version to Jelly Bean.
Official Mod is now available on micromax ftp server.
You can search the net for micromax ftp server but you will have to login with username and password which is also easily available on net.
Just search for Micromax site username and password & u will get it.

Why Jelly bean : The JellyBean Version improves the lag on screen & it makes your touch more smooth at least you can feel this way, it is because of Project Butter,it is an integral part of JellyBean Version which you cannot see but it does modification to your existing version to give you a lag free touch experience.

Now For the Voice :
For this you will need to use the Engineering Mode
NOTE: Use it one your own risk/ i have tested all these settings and they work good for me but if you are not certain on how to use it or you don't have any techie knowledge prefer don't use it.

Audio Settings :
  1. To Go to engineering mode go to your dial pad & type "*#*#3646633#*#*" without the exclamatory signs yeah you cannot use them in dial pad ;-) Next.
  2. Now If you have upgraded your phone then scroll on to right or if not then scroll down to hardware Testing Tab.
  3. In here Just Select audio then go to Loudspeaker Mode
  4. Now scroll down to Max Vol 0-160: By Default it is 128 & You can change it to 160 but at 150 and above i noticed it produces more noise then voice. When selected your preferred settings Click on set.
TV Output :  *#*#3646633#*#*
  1. Now in Hardware testing tab only you can also check your touchscreen Response their are settings like Handwriting recognition & Multitouch, just don't go in settings.
  2. Now in the hardware Testing Tab only you will find Tv Out and you can select tv -out Enable/Disable tick to enable it and then use otg cable and then usb to hdmi cable to view tv.
Wifi Performance Improvement:

  1. In Engineering Mode Only go to the Connectivity Tab :
  2. Now Select Wifi
  3. Next go to the Tx in this if you change Tx power Dbm then you will be able to improve your Wifi Performance Also.
  4. I was able to change it after rooting and using a software Wifi Fixer or analyzer.
Hope All this will help you in some way.


  1. Hi,
    There no such cable usb to hdmi,so have can we connect to tv?


    1. see the video over here and it you must get this cable

  2. Bro can u z tell me default sms setting... coz i cant send shows sms not sent even all sim settings are ok... may b its coz i formatted it.... so plz post default settings for that

    1. ask to mobile operator customer care executive,they will give you SMS service center no.

    2. Ok n nvran error?? Can u tell me default settings??? So i wanna try it by commands.. i mean when i choose NVRAM so inside mostly commands r blank... can u send me a scrednshot only???

  3. hi can you tell me what will be the ideal Tx power Dbm has to set ?

  4. How much to set that Tax dBm value ???

  5. Engineering mode not work in jeally bean

  6. How to use tv out ? please advise. I tried engineering mode even after connecting with a cable from mobile to tv. please guide.

    1. try this link it is the proof with cable

  7. thank you dude... my a110 loudspeaker volume issue solved.. once again thankyou 4 help me...

  8. Hi i have micromax a110 canvas 2 ,in which i have selected TTY mode in audio settings ,now i have a problem in calling using headset ,voice hears very low to others ,pls let me know how to change these settings back,now i am unable to see these settings.

    1. go in your call settings open other settings thier and select tty mode off

  9. Hi Sweet_devil89!

    Please, if you could answer the following;

    How to come out of the Engineer Mode?

    For remaining connected to a TV, would I have to keep my phone in Engineer Mode continuously?

    Would I have to put my phone to Engineer Mode every time I connect my phone to my TV?

    Any disadvantage/side-effect of putting phone to Engineer Mode?

  10. Hi, can you please tell me how to avoid the audio cracking sound on loudspeaker on my rooted canvas 2 .

    Thanks in advance.

  11. Hi,

    I am using canvas 2 plus phone and i am in the engineering mode however unable to find the tv out option....please help....


  12. Hii. I have got new micromax turbo. I feel volume during call is a bit low. Can i increase it by any mean ?

  13. Pls send me default setting for headset for all type and level.

  14. your blogs is awesome.
    Cricket Pack
    Ball by ball score and Regular news updates on your phone now.
    To activate dial 543213 ( toll free).